ive knocked up an Eng Drawing of the inlet flange.........

attached, its the inlet flange for those who want to get them laser cut or something. ive attached a Catia drawing too so you can give it straight to the engineering shop if they use catia (version VR17)

i havent tested it but when printing it out it matched an inlet manifold gasket i had.

i made it with a tolerance of +/-1mm so if you want anything more accurate do it yerselves :D

feel free to share it with other forums etc

i made up something similar for a pinto exh side can't find it at the minute :confused: i'll have a look if anyones interested

sorry, the 2 uploads above are the engineering drawings - this is the CatPart file

reattached because someone wanted it and turbosports attachment system isn't the most reliable thing in the world :D

you forgot a few angles and rads :tongue:

only jkin nice one mate

Quote:

---

Originally Posted by longboy

i made up something similar for a pinto exh side can't find it at the minute :confused: i'll have a look if anyones interested

---

maybe matey please:thinking::thumb:

Heya,

Take an look at this...

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=330285937966

This guy places them often. i'm using 1 for in my project. it fits perfect.

i will try to remember to compare it to the drawing i made.(made loads and they fit fine;)) i will drop you a pm if i find anything way different. +/- 1mm is quite a lot but mines only give or take 1/2 a thumb:D

the guy on ebay is reasonable for prices for sure.

can anyone do an autocad from this ? i have one that gives most dimensions but it was never finished for me. most laser places accept dfx format.

I can redraw that in AutoCAD but there are some critical dims missing, e.g port spacings, mounting hole OD's, so would be impossible without also i guess the external rad's and dim's are not critical?

port spacing is there, bottom left

this files got a few bits on like this cant find a free win zip at the min will post the cad file tommorrow

looks like pinto ex flange

:doh:yep should read the tread first :rolleyes:

Quote:

---

Originally Posted by trialsrich

I can redraw that in AutoCAD but there are some critical dims missing, e.g port spacings, mounting hole OD's, so would be impossible without also i guess the external rad's and dim's are not critical?

---

tell me whats missing, i'm sure i've not missed anything out.

the reason for ther +/- 1mm is that i made it from an inlet manifold gasket, so its only going to be as accurate as the thing i made it out of. which isn't very :D

Can I have an Zetec exhaust flange drawing and AutoCAD file please :D

can you do an inlet flange one for 2.0 duratec aswell?

I forgot about this, possibley attached is a pdf of an autoCAD drawing of what i can do with the info i have. ( I have assumed stud hole of 8mm)
There is a slight cross up, at the stud hole marked 'A' there is a difference of 0.54mm
Let me know if you want me to and if you do how to go from here!

Quote:

---

Originally Posted by 1.8 esc

can you do an inlet flange one for 2.0 duratec aswell?

---

post me a manifold gasket and i'll be happy to :)